INCH-POUND
A-A-59959
06 OCT 2014
COMMERCIAL ITEM DESCRIPTION
COMPUTER CONTROLLED TORQUEING SYSTEM
MOUNTER AND DEMOUNTER, PNEUMATIC TIRE,
The General Services Administration has authorized the use of this Commercial Item Description
(CID) for all federal agencies.
1. SCOPE
1.1 Scope. This Commercial Item Description (CID) covers the general requirements for a
stationary, hydraulic motor driven Mounter and Demounter, Pneumatic Tire with Computer
Controlled Torqueing System for tube or tubeless tires used on aircraft.
2. CLASSIFICATION
2.1 General. The Mounter and Demounter, Pneumatic Tire, Computer Controlled Torqueing System
covered by this CID should be commercially available equipment that has factory installed options
and/or may be modified to the extent necessary to comply with the inspection and test requirements
set forth herein to satisfy a government requisite.
3. SALIENT CHARACTERISTICS
3.1 First Article. When specified (see 7.2), one sample of the Mounter and Demounter,
Pneumatic Tire, Computer Controlled Torqueing System shall be subjected to first inspection in
accordance with 5.2.
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data
which may improve this document should be sent to: WR-ALC [AFMC 404 SCMS/GUEEA],
235 Byron Street, Suite 19A, Robins AFB GA 31098-1813. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
database at https://assist.dla.mil.
AMSC N/A
FSC 4910
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business