A-A-59959
hydraulic fluid capacity shall be 1.5USG.
3.7 Pneumatic system. Any required air source shall be 70-130PSI.
3.8 Workmanship. The Mounter and Demounter, Pneumatic Tire, Computer Controlled
Torqueing System including all parts and accessories, shall be constructed and finished in a
thoroughly workmanlike manner. Workmanship objectives shall include freedom from
blemishes, defects, burrs and sharp corners and edges; accuracy of dimensions, surface
finish, and radii of fillets; thoroughness of welding, painting, and riveting; marking of parts
and assemblies; and proper alignment of parts and tightness of assembly fasteners.
3.8.1 Bolted connections. Bolt holes shall be accurately punched or drilled and shall be
deburred. Threaded fasteners shall be tight and shall not work loose during testing or service
usage.
3.8.2 Gear and lever assemblies. Gear and lever assemblies shall be properly aligned and
meshed and shall be operable without interference, tight spots, loose spots, or other
irregularities. Where required for accurate adjustment, gear assemblies shall be free of
excessive backlash.
3.8.3 Cleaning. The Mounter and Demounter, Pneumatic Tire, Computer Controlled Torqueing
System shall be thoroughly cleaned. Loose, spattered, or excess solder; welding slag; stray
bolts, nuts, and washers; rust; metal particles; pipe compound; and other foreign matter
shall be removed during and after final assembly.
4. REGULATORY REQUIREMENTS
4.1 Recycled, recovered, environmentally preferable, or bio-based materials. Recycled,
recovered, or environmentally preferable, or bio-based materials should be used to the maximum
extent possible, provided that the material meets or exceeds the operational and maintenance
requirements, and promotes economically advantageous life cycle costs. The offeror/contractor is
encouraged to use recovered materials to the maximum extent practicable, in accordance with
paragraph 23.403 of the Federal Acquisition Regulation (FAR). However, used, rebuilt, or
remanufactured components, pieces, and parts shall not be incorporated in the forklift.
4.2 Green Procurement Program. Green Procurement Program (GPP) is a mandatory federal
acquisition program that focuses on the purchase and use of environmentally preferable products
and services. GPP requirements apply to all acquisitions using appropriated funds, including
services and new requirements. FAR 23.404(b) applies and states the GPP requires 100% of EPA
designated product purchase that are included in the Comprehensive Procurement Guidelines list
that contains recovered materials, unless the item cannot be acquired: a) competitively within a
reasonable timeframe; b) meet appropriate performance standards, or c) at a reasonable price.
The prime contractor is responsible for ensuring that all subcontractors comply with this
requirement.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business