A-A-59959
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product Conformance. The Mounter and Demounter, Pneumatic Tire, Computer Controlled
Torqueing System provided shall meet the salient characteristics of this CID, conform to the
producer's own drawings, specifications, standards, and quality assurance practices, and be the
same unit offered for sale in the commercial market. The government reserves the right to
require proof of such conformance by requesting contractor data that meets the requirements of
this CID.
5.1.1 Classification of inspection. The inspection requirements specified herein and in Table III
are classified as follows:
a.
First Article (see 5.2)
b.
Conformance inspection (see 5.3)
Table III. Requirement verification matrix.
Verification
Method
Section 3 Requirement
Section 4 Verification
Test
3.1 First Article.
Analysis
Demonstration
3.2 Mounter and Demounter,
N/A
Pneumatic Tire description.
3.3 Design and construction.
Examination
5.5.1 Examination of product.
3.3.1 Materials, protective coatings,
N/A
and finish.
3.3.1.1 Protective coatings.
Examination
5.5.1 Examination of product.
3.3.1.2 Dissimilar metals.
Examination
5.5.1 Examination of product.
3.3.1.3 Finish.
Examination
5.5.1 Examination of product.
3.3.2 Markings.
Examination
5.5.1 Examination of product.
3.3.3 Identification and information
N/A
plates.
3.3.3.1 Identification plate.
Examination
5.5.1 Examination of product.
3.3.4. Environment, Safety, and
N/A
Occupational Health (ESOH).
5.5.2 System safety hazard
3.3.4.1 System safety.
Analysis
analysis.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business