A-A-50304
(h) Has two independent fuel systems, each with a primer pump, a shutoff and pressure modulating valve, and a pressure gage, for (1) gasoline fueled carburetor and gasoline fuel injection type engines and, (2) compression-ignition type engines.
(7) Engine electrical system that:
(a) Is self-contained unit which can be easily attached and removed from the power absorber frame.
(b) Includes provisions for two 12 volt vehicle wet storage batteries (wired in series) and an insulated wiring system for negative grounded 12 and 24 volt ignition systems.
(c) Includes provisions for remote control operation of starting relays, and booster coils at the control console.
(d) Has starting relays and circuits capable of handling maximum starting currents.
(e) Has cables conforming to NEMA Publication WC3 capable of transmitting imposed electrical currents and voltages.
(f) Has an automatic battery charger, with a two stage charging rate, equipped with an automatic regulator that provides a charging rate of 5 to 6 amperes per hour when the battery voltage drops below normal, and to provide a “trickle” charge of not more than one ampere per hour, and equipped with a meter and a meter switch.
(8) Junction box conforming to type 12 electrical enclosure per NEMA 250 attached to the power absorber frame for connecting leads to their respective system.
b. Two mobile engine stands that:
(1) Are capable of supporting engines weighing up to 5,000 pounds.
(2) Have adjustable front and rear mounts and include mounting adapters for the installation and alignment of all engines listed herein.
(3) Are mounted on a minimum of four wheels that:
(a) Rigidly mounted non-swivel type on one end and 360 degree swivel caster type on the other end.
(b) A minimum diameter of four inches and provide free steerable movement of the loaded engine stand in any direction over the floor surface.
(c) Provided with antifriction bearings.
(d) Located on the engine stand such that the wheels effectively support movement and prevent and unbalanced or tipping condition of the stand when loaded with the maximum weight of 5,000 pounds.
(e) Provided with foot actuated brakes (swivel wheels only) to prevent movement of the engine stand.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business