INCH-POUND
MIL-PRF-83766B
1 August 97
M
SUPERSEDING
IL-F-83766A(USAF)
27 December 1984
PERFORMANCE SPECIFICATION
FILLER AND PRESSURIZATION UNIT, HYDRAULIC SYSTEM
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. The filler and pressurization unit covered by this document will be operated in
hangars, flightlines, and flight decks for servicing aircraft hydraulic systems with pressures from 0-
3,000 psi.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: SA-ALC/TILDD, 485 Quentin
Roosevelt Rd., Bldg 171, Kelly AFB, TX 78241-6524 by using the self addressed Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by
letter.
AMSC N/A
FSC 4910
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business