A-A-50313A
d.Easily lifted and transported by one person.
e.Materials identical to materials used in the manufacturer's industrial quality (see definition) creepers. f. Includes a headrest.
g.Includes 4 casters, one near each corner. Certification shall be provided that the service life of the casters is at least one year.
h. Manufactured to definite standards and tolerances that provides for interchangeability of respective parts between same models.
i. Includes protective finish on parts that are not inherently corrosion resistant. j. Includes fastening devices that stay tight in service.
3.3 Performance. The creeper shall be such as to withstand, without more than 0.125 inch (3.18 mm) permanent set or deformation in any direction, structural failure or damage when subjected to the following:
a. An evenly distributed load of at least 300 pounds (136.08 kilograms) over the whole creeper.
b. An evenly distributed load of at least 100 pounds (45.36 kilograms) over 50 percent of the headrest area.
c. 50 cycles of a back and forth movement with creeper uniformly loaded with 200 pounds (90.72 kilograms) with the casters operating freely with no damage, sticking, binding, or loosening, and with no wearing of the caster flange thickness in excess of five (5) percent of the original thickness. The back and forth movement shall be no less than 36 inches (91.4 mm) in each direction.
3.4 Marking. Creeper, mechanic's supplied to this CID shall be marked with the manufacturer's (MFR's) Standard commercial PIN. (NOTE: The part number marked on the unit pack shall be the CID PIN.)
3.5 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.
3.6 Workmanship. Creeper, mechanic's shall be processed in such a manner as to be uniform in quality and shall be free from other defects that will affect life, serviceability, or appearance.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with 23.403 of the Federal Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE PROVISIONS.
5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business