[INCH-POUND] A-A-50313A
10 October 2012
SUPERSEDING A-A-50313
15 April 1994
COMMERCIAL ITEM DESCRIPTION CREEPER, MECHANIC'S
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
1.SCOPE. This commercial item description (CID) covers the general requirements for creeper, mechanic's. Creeper, mechanic's covered by this CID are intended for commercial/industrial applications.
2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which is included in the PIN as shown in the following example (see 7.1).
AA50313 |
- |
001 |
|
CID number |
Dash number |
2.1 Dash size. Dimensions (Dash 001): length - no less than 35 inches (889 mm); width - no less than 15 inches (381 mm), height - from ground to creeper underside no less than 0.5 inch (12.7).
3. SALIENT CHARACTERISTICS.
3.1 Interface and physical dimensions. Creeper, mechanic's supplied to this CID shall be as specified herein. It shall be of an industrial quality that complies with the salient characteristics herein. The creeper shall be new and the manufacturer's current model at the time of the offer.
3.2 Characteristics. The Creeper, mechanic's r shall meet the following characteristics:
a.Provides for balanced and stable support of user.
b.Maneuvers on shop floor surfaces with even and uninterrupted movements that cause no resistance to rolling.
c.Withstands loads as specified herein.
Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime, Attn: VAI, 3990 East Broad Street, Columbus, OH 43218-3990 or fluidflow@.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online at https://assist.dla.mil.
AMSC N/A FSC 4910
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business