A-A-59959 Mounter and Demounter, Pneumatic Tire, Computer Controlled Torqueing System
A-A-1710 - Gage, Tire Pressure, Precision Type (S/S By Gg-G-91)
A-A-1724 - Gage, Tire Pressure, Precision Type (S/S By Gg-G-91)
This commercial item description covers new commercial low pressure tire pressure gages.
A-A-1725 - Gage, Tire Pressure, Precision Type (S/S By Gg-G-91)
A-A-1726 - Gage, Tire Pressure, Precision Type (S/S By Gg-G-91)
This commercial item description covers new commercial heavy-duty type general service tire pressure gages.
A-A-1731 - Gage, Tire Pressure, Precision Type (S/S By Gg-G-91)
This commercial item description covers new commercial air and liquid type tire pressure gages.
A-A-1732 - Gage, Tire Pressure, Precision Type (S/S By Gg-G-91)
A-A-50302 - Plug Set, Radiator Test
A-A-50304 - Dynamometer, Engine Run-In, 500 Horsepower Capacity
A-A-50308 - Balancer, Vehicle Wheel, Bubble-Type, Portable
A-A-50313 - Creeper, Mechanic'S
This commercial item description (CID) covers the general requirements for creeper, mechanic’s. Creeper, mechanic’s covered by this CID are intended for commercial/industrial applications.
A-A-58038 - Diesel Engine Fuel Injector Cleaner
This Commercial Item Description describes a diesel engine fuel injector cleaner designed to clean the fuel injection of vehicles powered by diesel engines.
A-A-58048 - Guard, Safety, Tire Inflation
This Commercial Item Description (CID) is for a tire safety cage used for inflating large truck and aircraft tires. The cage is limited in use to tires with a pressure rating of 232 psi. The cage features is in compliance with AFOSH 91-20.
A-A-58053 - Bead Breaker, Pneumatic Tire (S/S By A-A-59914)
This commercial item description covers a pneumatic tire head breaker rated at ten tons. It is hydraulic in operation and is powered by an explosion proof electric motor. It is intended to be used to break the beads of divided wheel aircraft tires ranging in size horn 15-58 inches diameter and 4-22 inches wide.
GG-G-0050 - Gage, Tire Pressure, Self Contained, Extra Low Pressure (S/S By Gg-G-91D
GG-G-91 - Gages, Tire Pressure, Self Contained And Inflator Gage, Pneumatic Tire (S/S By A-A-59568)
This specification covers direct-reading tire pressure and inflator gages, calibrated in pounds per square inch (p.s.i.).
GGG-J-1564 - Jacks, Dolly Type, Hydraulic, Automotive (S/S By A-A-59545)
This specification covers manually operated, full standard chassis length, two speed, hydraulic jacks for lifting automotive vehicles.
GGG-S-630 - Spreader, Tire, (Pneumatically Operated)
GGG-V-790 - Vulcanizers, Hot Patch And Plate, Inner Tube
KKK-C-650 - Creeper, Mechanic'S (S/S By A-A-50313)
MIL-A-13092 - Adapter Set, Engine Electrical Test
This specification covers an adapter set for use in testing sealed automotive type electrical circuits.
MIL-A-14295 - Alignment Equipment, Wheel, For Military Wheeled Vehicles
This specification covers wheel alignment equipment used to measure wheel alignment, provide for the adjustment and correction of wheel alignment angles, determine tracking (four or more wheels), and provide a method for steering gear centering.
MIL-A-19129 - Analyzer, Engine, Airborne
MIL-A-19778 - Analyzer Set, Engine, Portable (For 6-, 12-, 24-, And 32 Volt
MIL-A-19854 - Analyzer Set, Engine, Electrical And Combustion System, Knock Down Portable Type (6, 12 And 24 Volts) (Use Mil-A-9947, Mil-A-19778 Or Mil-A-45031)
MIL-A-21962 - Alignment Service Unit, Motor Vehicle
MIL-A-45016 - Alignment Service Unit Motor Vehicle With Frame Straightening And Alignment Capabilities
This specification covers a frame straightening unit for detecting and correcting misalignments and distortions of frames, axles and axle housings.
MIL-A-45031 - Analyzer Test Sets, Vehicle Engine, 6-, 12-, And 24-Volt D.C.
MIL-A-4554 - Aligning And Straightening Equipment, Motor Vehicle Axle, Frame And Wheel
MIL-A-45597 - Analyzer, Engine, Electronic, Console-Type
This specification covers one type of engine analyzer use to test automotive internal combustion, spark-ignition engines of commercial and military vehicles.
MIL-A-9947 - Analyzer, Engine, Universal (Commercial Type)
MIL-B-14154 - Boring Machine, Cam And Main Bearing, Portable
This specification covers one type of portable, universal boring machine for line boring, facing, and filleting cam and main bearings in motor vehicle engine blocks.
MIL-B-19681 - Boring Machine, Cam And Main Bearing, Portable (Use Mil-B-14154)
MIL-B-26994 - Balancer, Vehicle Wheel, On-Vehicle Type
This specification covers portable, electronic, vehicle wheel balancer that indicates the position and amount of running unbalance, static (up and down) vibration, and dynamic (side to side) vibration of vehicle wheels and tires while the wheels and tires are mounted on the vehicle.
MIL-B-2772 - Boring Machine, Engine Cylinder, Portable, Motor Driven, Shipboard Use (Use Oo-B-580)
MIL-B-45041 - Buffing Machine, Tire Tread
MIL-B-45048 - Boring Machine, Connecting Rod And Piston Bearing (S/S By Mil-H-45583)
MIL-B-45190 - Balancer, Vehicle Wheel, On-The Vehicle Type (Use Mil-B-26994)
MIL-B-45548 - Bead Breaker, Pneumatic Tire, Portable (Tires Sizes 14.00 X 24 Through 37.50 X 33)
This specification covers one type and size of portable tire bead breaker for off-the-road equipment. The bead breaker facilitates tire rmoval while the wheel ramins on the vehicle. This type of bead breaker is not intended for use on agricultural or forestry equipment.
MIL-B-45857 - Boring Machine, Cam And Main Bearings (Stationary)
MIL-B-45989 - Balancer, Vehicle Wheel, Bubble-Type, Portable (S/S By A-A-50308)
MIL-B-45993 - Bead Breaker, Pneumatic Tire, Portable Air Or Air Over Hydraulic Operated
MIL-B-82093 - Boring Machine, Connecting Rod And Piston (Pin End And Pin Holes)
MIL-B-9895 - Bead Breaker, Hydraulic, Pneumatic Tire
MIL-C-11811 - Compound Radiator, Antileak, 1-Pt. Can
MIL-C-13832 - Clutch Rebuilder, Motor Vehicle, Universal Type
MIL-C-14153 - Clamp, Wheel Cylinder, Hydraulic Brake
MIL-C-14567 - Cleaner And Tester, Spark Plug
MIL-C-14573 - Cleaning And Flushing Machine, Automotive Cooling System
MIL-C-14625 - Curing And Bags And Curing Tubes, Tire Repair, Recapping, And Retreading
MIL-C-45192 - Constructor, Bead Expanding, Pneumatic Tire
This specification covers one type of manually actuated pneumatic tire constrictor used to expand the beads of deflated tubeless tires against the tire rim to form an airtight seal.
MIL-C-45563 - Cleaning And Testing Kit, Spark Plug (Aircraft Type)
MIL-C-45820 - Cable Assemblies, Electrical
This specification covers special flexible electric cable assemblies to be used in repair shops and field applications.
MIL-C-744 - Cleaning Abrasive, Spark Plug, Ceramic Insulator (Use Mil-G-9954)
MIL-D-13817 - Dynamometer, Engine Test And Run-In, 700 Horsepower, Hydraulic Type
MIL-D-18429 - Demounter-Mounter, Pneumatic Tire (S/S By Mil-M-45083)
MIL-D-19090 - Dynamometer, Run In, Hydraulic,300 And 500 Horsepower (S/S By Mil-D-45561)
MIL-D-26763 - Dynamometer, Vehicle Chassis, Single Drive
MIL-D-45027 - Detector, Engine Bearing Oil Leak
MIL-D-45084 - Demounter, Pneumatic Tire, Portable (Sizes 7.00 By 16 Through 14.00 By 24) (S/S By Mil-B-45993)
MIL-D-45123 - Dynamometer, Chassis, Rubber Tired Vehicles, Multiple Wheel Drive
MIL-D-4516 - Dynamometer, Rubber And Tired Vehicle Multiple Wheel Drive Type
MIL-D-45561 - Dynamometer, Engine Run-In, 500 Horsepower Capacity
This specification covers a dynamometer designed and constructed to facilitate the testing and run-in of reciprocating-piston, internal combustion engines having outputs up to and including 500 brake horsepower (Hp).
MIL-D-4564 - Descaling Machine, Radiator
MIL-D-45808 - Dynomometer, Engine Run-In 1000 Horsepower Capacity
This specification covers a dynamometer designed and constructed to facilitate the testing and run-in of reciprocating-piston, internal combustion engines having outputs up to and including 1,000 brake horsepower (hp).
MIL-D-45959 - Demounter, Pneumatic Tire, Portable, Self Contained
MIL-F-13921 - Filler And Bleeder, Brake Hydraulic System (Use Mil-F-19849)
MIL-F-14618 - Grinding Machine, Piston
MIL-F-19849 - Filler-Bleeder, Hydraulic Brake System, Automotive (S/S By A-A-59437)
This specification covers a pneumatic filler-bleeder unit for servicing the hydraulic brake systems of automotive-type vehicles. The filler-bleeder unit has a diaphragm which separates the operating air pressure from the hydraulic brake fluid. The filler-bleeder has a hydraulic brake fluid reservoir tank capacity of a 4 gallons plus/minus 1 gallon.
MIL-F-45810 - Fixture Removing And Replacing Pole Piece Screws
MIL-F-45955 - Flow Test Machine, Radiator
MIL-F-5182 - Filler And Bleeder, Hydraulic Systems, Type C-1
MIL-G-13920 - Grinder, Crankshaft, Portable
MIL-G-14562 - Gun, Flushing, Radiator And Engine Block (S/S By A-A-50311)
MIL-G-14575 - Grinding Machines, Cylinder Head (Dry Type)
MIL-G-15353 - Gages, Compression And Compression And Firing Pressure-Diesel Engine Cylinder
MIL-G-19711 - Grinding Machine, Crankshaft (S/S By Mil-G-45006)
MIL-G-19825 - Grinding Machine, Piston (S/S By Mil-G-14618)
MIL-G-21651 - Gun Aircraft, 20 Mm Mark 12 Mod 0 And Mod 3
MIL-G-45006 - Grinding Machine, Crankshaft
This specification covers floor type, electrically powered, grinding machines, complete with equipment and accessories, to be use in grinding main and throw journals of crankshafts removed from piston type engines.
MIL-G-45073 - Groover, Tire, Hand-Powered
MIL-G-4532 - Grinding Machine, Brake Lining, Portable (Use Oo-G-681)
MIL-G-45825 - Grinding Machine, Clutch Plate And Flywheel
MIL-G-45851 - Grinding Machine, Cylinder Head (Wet Type)
MIL-G-45930 - Grinding Kit, Valve Seat, Electric (Use W-G-690)
MIL-G-9937 - Grinding Machine, Brake Lining, Bench Mounted Type (Use Oo-G-681)
MIL-H-19440 - Heating Unit, Booster, Tire Repair
MIL-H-45583 - Honing Machine, Horizontal, Connecting Rod, With Gage; And Cap And Rod Grinder
This specification covers a honing machine equipped for resizing journal ends of connecting rods and for pin-hole fitting of rods and pistons for internal combustion engines. The honing machine consists of a precision honing machine and a cap and rod grinder.
MIL-H-45584 - Honing Machine, Cylinder Resizing
This specification covers a floor-mounted, automatic, honing machine for resizing engine cylinders.
MIL-H-62519 - Heater Test Stand
This specification covers a heater test stand used to test fuel-fired vehicle personnel heaters and fuel-fired engine coolant heaters.
MIL-H-82094 - Honing Machine, Horizontal, Single Spindle, Wet Type, Electric Motor Driven
MIL-I-11707 - Inflator-Gage, Pneumatic-Tire
MIL-I-443 - Indicator, Connecting Rod Alignment
This specification covers an indicator for checking alignment characteristics of piston connecting rods used in internal combustion engines.
MIL-I-45171 - Inflator Gage, Pneumatic Tire, With Case
MIL-I-45181 - Indicator, Piston Position, Ignition Timing
MIL-J-4559 - Jack, Hand, Hydraulic, 2 Ton Capacity Dolly Type
MIL-J-7764 - Jack, Tripod Nose (5 Ton)
MIL-L-13009 - Light, Ignition Timing
MIL-L-13793 - Lift, Motor Vehicle, Full Hydraulic
MIL-L-20703 - Light, Ignition (Magneto)
MIL-L-45047 - Lift, Vehicle Driveline Components (2000 Pound Capacity)
MIL-L-45591 - Light, Ignition Timing: With Integral Timing Advance Indicator And Tachometer
MIL-L-4578 - Lift, Automotive, Pneumatic Oil, Two Post Type (36 Inch Minimum, 204 Inch Maximum Wheelbase Capacity)
MIL-L-4592 - Lift, Auto, Mobile, Pneumatic
MIL-M-14555 - Mounter And Demounter, Pneumatic Tire (14-Inch Through 16-Inch Rim Diameters)
MIL-M-45000 - Maintenance Fixture, Radiator, Air-Operated Hydraulic
MIL-M-45083 - Mounter-Demounter, Pneumatic Tire, Stationary
This specification covers one type of stationary, power-driven, mounter-demounter that changes pneumatic tires from wheeled vehicles.
MIL-M-4599 - Mounter And Demounter, Pneumatic Tire
MIL-M-62515 - Maintenance Repair Kit, Electrical For M901A2 And M981 Weapon Systems
This specification covers a maintenance repair kit, herein referred to as the kit, used for the maintenance and repair of electrical connectors, contacts, and connector and cable accessories used on the weapon stations of the M901A1 and M981 weapon systems.
MIL-O-45801 - Oscilloscope, Engine Ignition Analyzing, Portable
MIL-P-45570 - Plug Set, Radiator Test
This specification covers one adjustable compression-type motor vehicle radiator test plug set for plugging the radiator hose inlet(s) and outlet(s) during tests and repairs.
MIL-P-45805 - Polishing Machine, Automotive Crankshaft And Cam Shaft
MIL-P-45819 - Pans, Drain, Automotive
This specification covers two sizes of drain pans used for collecting oil being drained from automotive vehicles.
MIL-PRF-83766 - Filler And Pressurization Unit, Hydraulic System
The filler and pressurization unit covered by this document will be operated in hangars, flightlines, and flight decks for servicing aircraft hydraulic systems with pressures from 0-3,000 psi.
MIL-R-13495 - Reliner, Brake And Clutch Riveting
This specification covers two types of floor mounted brake shoe and clutch reliners which are partially, or completely, powered by electric motors.
MIL-R-14561 - Rasp, Buffing, Tire Tread
MIL-R-45026 - Roller, Tire Tread, Power-Operated
MIL-R-4535 - Reliner Set, Brake Shoe, Bonding And Debonding
MIL-R-4549 - Reliner, Brake And Clutch
MIL-R-45843 - Rims, Curing, Tire Mold Vulcanizer
This specification covers curing rims utilized for supporting the curing tubes during tire vulcanizing operations.
MIL-S-14551 - Spreader Tire, Air Operated, Portable (For Earth Moving Equipment).
MIL-S-14577 - Spreader, Tire, Sectional, Air-Operated, For Automotive Equipment (Use Ggg-S-630)
MIL-S-19912 - Stand, Maintenance, Automotive Engine,
MIL-S-45004 - Stand, Maintenance, Automotive Engine (6,000 Pound Capacity)
MIL-S-45017 - Straightener, Motor Vehicle Axle And Housing
MIL-S-4534 - Stand, Radiator Test And Repair
MIL-S-45821 - Spreader, Tire, Full Circle (Use Fed Spec Ggg-S-630A
MIL-S-45862 - Scale, Fitting, Internal Combustion Engine Piston
MIL-S-45944 - Sling, Engine And Transmission, Motor Vehicle (Mechanical Tilting)
MIL-S-4596 - Spreader, Tire, Pneumatic
MIL-T-10308 - Test Set Low Voltage Circuit, Automotive, 12 And 24 Volt Dc Systems
This specification covers one type of low voltage circuit test set for testing standard electrical systems incorporated in commercial and military automotive vehicles, including tanks.
MIL-T-10357 - Test Set, Distributor Cam Dwell And Engine Rpm (Use Mil-T-45568)
MIL-T-13007 - Test Stand, Ignition, Magneto
MIL-T-13011 - Tester, Cylinder Compression (Automotive Maintenance)
This specification covers an automotive maintenance cylinder compression tester used to determine internal combustion engine cylinder compression not exceeding 250 pound-force per square inch gage (psig). The cylinder compression tester is of the universal type with threaded adapters and rubber cones.
MIL-T-13013 - Tester, Internal-Combustion Engine (Vacuum And Pressure)
This specification covers one type of tester used for testing various vacuums and pressures of internal combustion gasoline engines in vehicles and other types of gasoline engine driven equipment.
MIL-T-13016 - Test Set, Ignition Coil-Capacitor-Resistor
MIL-T-13089 - Tester, Engine Distributor
MIL-T-13906 - Tables, Work, Maintenance
This specification covers work tables with laminated hard maple tops which are installed in shop sets and need for maintenance operations.
MIL-T-14521 - Trestles, Motor Vehicle Maintenance And Storage (Vehicle Support Stands)
MIL-T-14537 - Truck, Lift, Wheel
MIL-T-14608 - Tanks, Testing, Tire And Tube (S/S By A-A-59434)
MIL-T-19441 - Trestle, Motor Vehicle Maintenance
MIL-T-19873 - Tester, Brake, Motor Vehicle (Service Mounting Drive-On Type) (S/S By Mil-T-45816)
MIL-T-21076 - Tester, Diesel Fuel Injection Nozzle (S/S By Mil-T-45049)
MIL-T-2453 - Tester, Fuel-Injector Pump, With Stand, Motor-Driven
MIL-T-26057 - Tester, Brake, Hydraulic, Vehicle Type (S/S By Mil-T-45816)
MIL-T-28592 - Test Kit, Diesel Engine
MIL-T-28967 - Test Set, Internal Combustion Engine
MIL-T-45037 - Tester, Headlight Beam, Portable
MIL-T-45043 - Towbar, Motor Vehicle, V-Type
MIL-T-45049 - Tester, Diesel Fuel Injector
MIL-T-4544 - Test Stand, Automotive Generator, Alternator, Starter, Associated Equipment
This specification covers a 0- to 500-ampere capacity test stand for testing generators, alternators, starters, and their associated regulating and rectifying equipment utilized on tank and automotive equipment.
MIL-T-45549 - Table, Folding Legs, Automotive Maintenance
This specification covers one type and size of worktable with a steel top and folding legs.
MIL-T-45568 - Test Set, Tachometer Dwell
MIL-T-45802 - Test Stand, Injector Pump, Fuel (Gasoline Or Other Light Fuels).
MIL-T-45816 - Tester, Brake, Motor Vehicle, Heavy Duty, Hydraulic, Universal.
MIL-T-45861 - Test Set, Electrical, Cable, Automotive Ignition, Portable
MIL-T-4588 - Tester, Headlight Beam, Portable
MIL-T-52585 - Tester, Hydraulic Systems, Portable
This specification describes minimum Government requirements of Portable Hydraulic Systems Testers(PHST) necessary to meet field military needs.
MIL-T-62314 - Test Equipment (Simplified) For Internal Combustion Engine (Ste/Ice) (S/S By Atpd 2205)
MIL-T-9934 - Indicator, Wheel Alignment
MIL-V-16289 - Vulcanizing Mold, Tire, Electrically Heated, For Sectional Tire Casing Repair
MIL-V-45038 - Vulcanizing Molds, Tire, Full Circle, Steam Heated (For Thru 12.00 By 20 Tires)
MIL-V-45039 - Vulcanizing Mold, Tire, Full Circle (Sizes 12.00 By 24 Through 30.00 By 33 Tires)
MIL-V-45063 - Vulcanizing Molds, Tire, Sectional, Steam-Heated
MIL-V-45077 - Vulcanizing Chamber, Tire
MS16284 - Jack, Dolly Type, Hydraulic
MS500047 - Towbar, Motor Vehicle: Universal V-Type
OO-B-580 - Boring Machine, Engine Cylinder, (Portable) (S/S By A-A-50314)
This specification covers two sizes of portable boring machines for reboring engine cylinders.
OO-G-681 - Grinding Machines, Brake Lining, Portable And Bench Mounted
This specification covers two types of grinding machines used to grind the outside surface on brake-linings to fit the internal brake-drums of vehicles.
OO-G-686 - Grinding Machine, Valve Face (S/S By A-A-59552)
This specification covers grinding machines used for reconditioning intake and exhaust valves of internal combustion engines by wet grinding.
OO-L-360 - Lift, Motor Vehicle
This specification covers single and double post hydraulic type lifts for motor vehicles.
OO-L-90 - Lathe, Heavy Duty, For Brake Drum And Disc Brake Rotor Turning And Truing(No S/S Document)
This specification covers a heavy duty truck brake drum and disc brake rotor lathe, pedestal base, floor mounted, with chip catcher and storage board, electrically powered, with equipment and accessories, for turning and truing brake drums and disc brake rotors of commercial and military passenger car and truck vehicles.
QPL-19129-2 - Analyzer, Engine, Airborne And Portable
W-G-690 - (
Images) Grinding Kit, Valve Seat, Electric
W-T-215 - Test Set, Generator And Voltage Regulator, Automotive
rbon Steel (Use Qq-E-450)
QPL-15716-38 - Electrodes, Welding, Covered, Molybdenum Alloy Steel Application
QPL-16053-91 - Electrode, Welding, Bare, Aluminum Alloys (Use Ansi/Aws A5.10-80)
QPL-16589-62 - Electrodes, Welding, Mineral Covered, Low Hydrogen, Chromium-Molybdenum Alloy Steel And Corrosion Resisting Steel
QPL-18038-46 - Electrode, Welding, Mineral Covered, Low Hydrogen, Medium And High Tensile Steel As Welded Or Stress-Relieved Weld Application
QPL-19141-36 - Electrode, Welding, Surfacing, Iron Base Alloy
QPL-19323-3 - Electrode, Welding, Covered, Copper Nickel Alloy
QPL-19822-12 - Electrodes, Welding, Bare, High-Yield Steel
QPL-19933-66 - Electrodes And Rods - Welding, Bare, Chromium And Chromium-Nickel Steels(Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-21562-44 - Electrodes And Rods-Welding, Bare, Nickel Alloy (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22200-65 - Electrodes, Welding, Covered; General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 2 For Additional Information)
QPL-22749-7 - Electrode (Bare) And Fluxes (Granular), Submerged Arc Welding, High-Yield Low-Alloy Steels (See Notice 1 For Replacement Information)
QPL-23765-52 - Electrodes And Rods - Welding, Bare, Solid And Alloyed Cored, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24355-8 - Electrodes, Welding, Bare, Solid, Nickel-Manganese-Chromium Molybdenum Alloy Steel For Producing Hy-130 Weldments For As-Welded Applications (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24403-36 - Electrodes-Welding, Flux Cored, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-45057 - Electrodes Welding Mineral Covered Low Hydrogen For Repair Welding Of Alloy Steel Castings
QPL-6843-9 - Electrode, Welding, Covered, Mild And Alloy Steel (For Aircraft Applications
QPL-8697-8 - Electrodes, Welding, Coating, Low Hydrogen, Heat-Treatable Steel
QPL-QQ-E-450-20 - Electrodes, Welding, Covered: Mild Steel
QPL-QQ-S-571-110 - Solder, Electronic (96 To 485 Deg. C) (S/S By J-Std-004, J-Std-005, J-Std-006)
QQ-B-650 - Brazing Alloys, Copper, Copper-Zinc, And Copper-Phosphorus (S/S By Aws A5.01 And Aws A5.8)
This specification covers copper, copper-zinc, and copper-phosphorus alloys for use in brazing ferrous and nonfereous base metals. Copper-phosphorus brazing alloys shall not be used on ferrous alloys or on alloys containing more than 10 percent of nickel because of the adverse effects of the phosphorus content (see 6.1).
QQ-B-654 - Brazing Alloys, Silver
QQ-B-655 - Brazing Alloys, Aluminum And Magnesium, Filler Metal (S/S By Aws-A5.8)
QQ-E-00445 - Electrode, Tungsten, Arc-Welding
QQ-E-450 - Electrodes, Welding, Covered: Mild Steel (S/S By Ansi/Aws A5.1)
QQ-R-566 - Rods & Electrodes, Welding, Aluminum & Aluminum Alloys (Use Aws A5.10)
QQ-R-571 - Rods, Welding, Copper And Nickel Alloys (S/S By A-A-51157, A-A-51158, And A-A-51173)
QQ-S-551 - Solder, Brazing
QQ-S-561 - Solder, Silver (Use Qq-B-654)
QQ-S-571 - Solder, Electronic (96 To 485 Deg. C) (S/S By J-Std-004, J-Std-005 And J-Std-006)
W-S-564 - Soldering Guns, Electric (S/S By A-A-59307)
W-S-570 - Soldering Iron Electric (S/S By A-A-59284)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business